Hawking Technology PS12U Manuale Utente

PS12U 2-Port USB 1-Port Parallel Internet Print Server

After PSAdmin is successfully installed, run the program by double-clicking the PSAdmin icon from “PSAdmi

1. Click on the Wizard button＜ ＞ and select TCP/IP Wizard. 2. (Optional) For DHCP Settings, you may select “Obtain an IP address from DHCP server”

4. In the Subnet Mask option, type the Subnet Mask your LAN or network segment is currently configured

NETWARE SETUP NetWare Wizard 1. Log into your NetWare file server as a Supervisor (Admin.) or equivalent. 2. Click Wizard button＜> and select NetW

5. Type in a Print Queue Names. Note: Each print queue corresponds to each print port of the print ser

server/Services manual for details). 2. Log into your NetWare file server as a Supervisor (Admin.) or equivalent. From your Windows 95/98/Me, run

6. (Optional) In Bindery Settings, Select NetWare file server(s) that print server can do Bindery mode.

Add Printers to Windows 95/98/Me To attach your printers to the appropriate port through Windows 95/98/Me you must follow the installation steps below

12. Select the Network Print Port and click OK. 13. The Add Port box will then appear, along with the P

PID (1): Parallel, PID (2): USB 1, PID (3): USB 2  By default, the computer will first search for the Print Server(s) on the network by using the

FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital devi

shown in the following picture. (The last 6 digits of the Node ID, located on the back of the Print Serve

Add Printers To Windows 2000/XP 1. Click Start, point to Settings, and select Printer. 2. Run Add Printer, Click Next. 3. The Add Printer Wizard scre

assigned to the Print Server in the Printer Name or IP Address box and Click Next. The port name can

7. In the Configure Standard TCP/IP Port Monitor box as shown in the picture above, select “custom device type” and then click Next.

Note: Please DO NOT type any other name than lp1, lp2 or lp3 in this step. 8. Type the correct printe

USB port on the top of the PS12U, type in “lp2” If you are connecting your printer to the second USB port, type “lp3” in the “Queue Name” box). 9.

Macintosh OS X Configuration Please follow these steps to install the PS12U on a Macintosh OS X computer.

Disable Use default queue on server. Queue Name: lp1, lp2, or lp3 (fixed) ( lp1 : Parallel Printer / lp2: USB 1 Printer/ lp3: USB 2 Printer) 3. Sel

Configure Your Print Server from Web Browser Before you can use the web browser to configure your PS12U,

Click on Printer, to show the information of each printer connected to the Print Server. Click on TCP/IP, to show the current TCP/IP setting. Cli

Hawking Technology guarantees that every PS12U is free from physical defects in material and workmanship under normal use for two (2) years from the d

Device Name: Device name of the Print Server. System Contact: Contact name of the Print Server. Sys

password. Click “Next” to configure Printers. Printer Setup Bi-directional: This option allows you to select the bi-directional function of the pr

Server. The IP address must meet the IP addressing requirements of the network segment. Subnet Mask: This

NetWare Setup 1. Log into your NetWare file server as a Supervisor (Admin.) or equivalent. 2. Select NetWare and type in the Print server that was c

Polling Time: The time interval in which the print server unit polls the file server for servicing of pri

Installing Print Server on NetWare 4.x/5.x Due to its architecture and functionality, the print server must work under NetWare 4.x/5.x NDS Bindery E

Installation Procedure 1. At your file server console, type “load install”. 2. Select “NCF files options

9. From your NetWare client computer, such as Windows 95/98/Me, create a printer that is connected (redirected) to the NetWare print queue serviced b

SNMP Setup TCP/IP networks use a standard management protocol called Simple Network Management Protocol (

summaries SNMP trap messages that the print server will send out. Activities/SNMP Trap Messages Description Link Up or Link Down When the network

Congratulations on your purchase of the Hawking PS12U Two Port USB + One Parallel Port 10/100M Interne

In the print server's SNMP implementation, the following MIB objects are available for updating. MIB

Users can set up print server’s SNMP functions by using their browsers. 1. Click Setup to appear in the sub-menu. 2. Click on SNMP SNMP Community: Th

AppleTalk Setup The print server can print jobs submitted from Macintosh workstations connected via Ether

asterisk (*) in the current AppleTalk Status of the print server in the web browser. 4. Port Name: In this option, type a name for identification pu

Internet Printer Connection and HP Web JetAdmin IPP Overview The PS12U supports the Internet Printing Pro

1. Click the Start button. 2. Select Settings, and then select the “Printers” option. 3. Click on the Add Printer icon. The add printer wizard welco

** Remember to add “lp1, lp2, or lp3”after the IP address to correlate to the printer on the PS12U that

9. If you want your Windows-based programs to use this printer as the default printer, please select “Yes ”, and Click Next. 10. Click the Finis

Firmware Upgrading Upgrading from your Browser 1. Enter the IP address of the Print Server as the URL.

Upgrade from PSAdmin 1. Click the Upgrade button＜ ＞, as shown in the following picture: 2. Select General Upgrade. Make sure that the upgrade file is

What you will need to get started  One - Three Printers  USB or Parallel Cables  One Ethernet cable attached to your main network  A compute

Question A Print jobs are sent to the print queue successfully, but fail to be sent to the printer. P

Solutions 1. Check all the information in PCONSOLE. 2. Check all the information of the print server by running PSAdmin. 3. Check to see that if

Try disabling bi-directional printing. This can be achieved through the print server’s setup functio

Question D The Status LED light keeps blinking after POST. Possible explanation and solution The last upgrade process was not completed. The pr

Solution Check to see if there is a space in the print server name, the printer name, or the queue name

Ethernet A networking standard using cables (Category 5) to create a network. IPP Internet Printing Protocol. IPP allows you to print your documents

IP address (Addresses used by ISP’s to assign broadband services to your computer) the Router distributes

MEMO

MEMO

LED Indicators The print server is equipped with three LED lights to assist in diagnosing print server or

MEMO

MEMO

Hardware Installation 1. Connect the PS12U Print Server to a network. 2. Connect the PS12U Print Server to your printer(s). 3. Plug the AC power ad

1) POWER ON: After you have correctly connected your router to your PC and Cable/DSL modem, please powe

4. The Setup program will ask you to select installation files as described below: a. Network Print Monitor: installs the Print server Windows Drive