Hawking Technology H-BR49 Manuale Utente

H-BR49 4-Port Broadband Router

Password Default setting: No password. Setting up a password: When configuring the device, press Enter to login the configuration for the first tim

For CATV dynamic mode: Adapter Address Some Internet Service Providers (ISP) require that you register the MAC address of your network card/adapte

For DSL dynamic mode: PPPoE Account Info Provided by your ISP Username Provided by your ISP. Password Provided by your ISP. Service Name For identi

Before you start setting up IP Sharing via browser-based web configuration, make sure that: • Assuming the workstation’s TCP/IP is set to obtain I

List), Factory Reset, Save Configuration, or Firmware Upgrade. Click on the desired setup item to expand the page in the main navigation pane. The

Figure 5 Device Information Adapter Address This field is grayed out because the Adapter Address is not supposed to be entered randomly. Do No

PPPoE (DSL dynamic Mode) If this mode is selected and settings are saved, this IP sharing device will be connected to the Internet over an always-o

Device Information Adapter Address This field is grayed out because the Adapter Address is not supposed to be entered randomly. Do Not alter the co

Service Name For identification purposes: if it is required, your ISP will provide you with the information. Max packet size (TCP MSS): Click the d

Note that there may be more than one IP address from your ISP; select one address and enter it in the corresponding field. Figur

Trademarks & Copyright Windows 95/98/ME and Windows NT/2000/XP are registered trademarks of Microsoft Corp. All other brands and product names ar

Device/Computer Name Enter a descriptive name for identification purposes. Some Internet Service Providers (ISP) require this information and if th

Figure 8 Private Network IP Address Default: 192.168.1.254 (this is the local address of this IP Sharing device) Subnet mask De

Start IP address The starting address of this local IP network address pool. The pool is a piece of continuous IP address segment. Keep the defaul

Advanced Setup Management In this management page, you can: 1. Change Administrator’s password: change the password for the device. 2. Limit Mana

Change Administrator’s password: 1. Click the checkbox to enable this change. 2. Enter the new password. 3. Re-enter the new password for confi

Figure 10 Modify the Configuration Port: 1. Click the checkbox to enable this function. 2. Input the port number for web configuration.

Figure 11 Add Server Method: By Name By Port You can select to set up a virtual server either by name or by port numbe

UNDO Click UNDO to clear all the settings on this page. ADD Each time you finished setting, click ADD and the added servers will appear on the Serv

Network Adapter Address Filter Filter according to the local computer’s network adapter MAC address (also known as the adapter card’s Physical Addr

Figure 12 ADD Every time you finish setting the filters, click the ADD button and the added filter will appear on the Filter List UNDO C

HAWKING LIMITED WARRANTY Hawking Technology guarantees that every H-BR49 Broadband Router is free from physical defects in material and workmanship

To set the static routers: 1. Select “Static Route #1” or “Static Route #2”. 2. Enter the settings. 3. You can refer to the following two exampl

Figure 17 Figure 18

Check E-Mail Check E-Mail: You may input your mail account on this IP Share and the device will check e-mails at the frequency that you previousl

Dynamic DNS The Dynamic DNS (Domain Name Server) allows you to alias a dynamic IP address to a static hostname, enabling your device to be more eas

Enable Wildcard Check to enable the Wildcard function. To learn more about Wildcard, please refer to the FAQ section. Mail Exchanger To learn more

RELEASE/DISCONNECT Click on this button to disconnect from the ISP and release all the IP information on the WAN port. RENEW/CONNECT Click on this b

IP Remote/Port Remote The outside network IP address/port number for the other end of the session. Idle The idle time of the session. If the idle t

Others Factory Reset To reset to factory default setting, click the GO button. Please note that performaing the Factory Reset will erase all previou

When prompted in the upper left screen, select “Save this file to disk”, and the upper right screen will prompt you a dialog box to enter the f

Firmware Upgrade 1. Download the latest firmware from your distributor and save the file on the hard drive. 2. Make sure all computers in the net

Introduction……………………………………………………………………………5 Factory Default Settings…………………………………………………………….10 Configuration via the Web………………………………………………………...13

The device has no password by default. It is recommended that you set a password to ensure that no one can adjust the device’s settings. 1. On the

Getting Started Note: • To use this GUI, you must have IE 4.01 or above preinstalled. • Before using this GUI program, be sure you have properly

1. To configure this Broadband Router via the setup program, click Basic Setup Tool. You will enter the setup screen. Figure 31 2. When the

3. Click on the tool bar to configure the selected device. Management Figure 32 Firmware Version The current firmware ver

Modify the configuration port Check to enable the modification for the web configuration port number setting. In the corresponding field, enter th

IP Address • Default: 192.168.1.254 SubNet mask • Default: 255.255.255.0 Do not distribute IP address to local computers1 Checking this radio but

CATV dynamic Mode Figure 34: CATV Dynamic Mode

Adapter Address It is necessary for some ISPs to identify the device by its IP. Device/Computer Name Enter a descriptive name for identification pu

Figure 35 PPPoE Account Active Profile You can set up to three PPPoE accounts (only one account can be enabled

and then click SAVE. The device will save the information, restart and return to the previous menu page. If you don’t see the saved information on

The H-BR49 Broadband Router is an integrated Internet IP sharing device with a built-in 4-port 10/100Mbps N-Way Fast Ethernet switch. It has superb

Static Mode Figure 36 Adapter Address It is necessary for some ISPs to identify the device by its IP. Device/Computer Name Enter a descrip

Domain Name For example: yourcompany.com. The maximum input for this field is 32 alphanumeric characters and it is case insensitive. IP Config.

Factory Reset To reset to factory default setting, click the reset button on the tool bar. A warning message appears to advise you that you will

User List Displays the current active users. Refresh: Click this button to refresh the list. Figure 39

Session List Displays active Internet sessions through this device. Refresh: Click on this button to refresh the list and get the latest session

When Should I modify the MAC address for WAN/global port settings? Some ISPs identify their clients by accessing the MAC address and the host names

on the Internet. You must register with a Dynamic DNS Client to use this service. Please go to HTTP://WWW.DYNDNS.ORG for more information. What is

How do I know if I am using PPPoE? If you are using a broadband connection and you are asked to login a user name and password in order to connect,

Check the physical connectivity of the broadband device. Examine the LED of the LAN port and the LED of the broadband signal input on the Cable Mod

Check the logical connectivity from your computer to the Internet. Refer to the section "PING.EXE" in the "TCP/IP Network diagnosis&

Figure 1: Sample Application

Note: Under “Ethernet Adapter Information”, select the correct Ethernet adapter that is installed on your computer. Figure 43: IP C

Figure 44: IP Configuration On the top, the computer’s “Host Name” and “DNS server” are configured to call whe

If the product is working properly, the following should be apparent from this screen: 1. The Client should have an IP address within the prescribe

4. The server (IP address) is online if the following message appears: Reply from 192.168.0.1: bytes=32 time=3ms TTL=100 5. The destination devic

Appendix A: Specifications Standards IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3x Flow Control Ports WAN: One 10/

Appendix B: Supported Internet Applications Application Settings for Outgoing Connection Settings for Incoming connection ICQ98a, 99b None None I

Appendix C: WAN PORT LINK STATUS PPPoE link status “PPPoE offline. Ready to connect.” The device’s wan port is not connected to the ISP’s d

DHCP link status "DHCP already claimed" The device obtained the IP address from the DHCP server. "DHCP under claiming" T

Features • Superb performance with throughput of up to 35Mbps between Internet and LAN. • Web and GUI management. • Supports PPPoE. • Supports

Part Names and Functions LED Indicators on the Front Panel Ports on the Rear Panel Figure 2: LED Indicators and Ports LED

Port/button Functions a 5V DC Connects the power adapter plug. b Internet Connects to a Cable/xDSL modem. c Local (1-4) Four RJ-45 dual-sp